How to care for and maintain an electric surfboard

Take JetFly electric surfboard as an example to share how to care for and maintain an electric surfboard. The JetFly electric surfboard product itself has stable performance, strong linear performance, and high buoyancy, making it suitable for novices.

Please clean it carefully after each use. The outer surface can be wiped with a damp cloth. Please rinse the internal dirt and sediment with water.

If you need to replace the battery and continue using it, please clean the battery box and electrode connector to remove any dirt or residual water.

When the product is not in use, turn off the remote control handle and remove the safety magnet to disconnect battery power.

When the product is not in use, please place it on the supporting stand provided with the product.

When the product is not in use, check the flow channel and filter. If there is any dirt or blockage, please clean it with a soft brush.

When the product has been running continuously for 300 to 400 hours or has been used continuously for 5 months, the motor sealing system needs to be cleaned or the sealing system components need to be replaced.

When the product is not used for a long period of time, the product should be dried and the battery should be charged regularly.

After use in seawater, do not necessarily use clean water to clean the board parts and remote control handle and wipe them dry.

After using sea water, please rinse the electrode part with clean water to remove sediment, then wipe it clean with a clean cloth and apply a layer of grease on the electrode.

When inserting the battery is not smooth, apply a layer of grease on the outer periphery of the battery electrode along the sealing ring.